Plastic Mouldings

FMS AS exclusively represents the Scottish enterprise Plastic Mouldings Ltd in the Norwegian market. The company offers the following processes for plastic products:

  • Dip moulding
  • Rotational Moulding
  • Vacuum Forming
  • Neoprene
  • Slush Moulding


Dip Moulding
Dip Moulding utilises varying processes with the starting process having the required mould  qmounted onto a plate or frame and pre-heated in an oven to a required temperature. Once heated, the frame is transferred to a dip tank containing liquid plastisol/vinyl. The dip tank is where the mould gains the required uniformity and thickness of the finished product using the pre determined dipping time and speed for this process. The next process is to remove the frame from the dip tank and place the frame, containing the product into another oven to be cured which creates the required bond to strengthen the product. The frame is then taken out and cooled in cold water to enable the moulded product to be removed from the frame using a manual or compressed air method.   

Rotational Moulding
Rotational Moulding is used for creating hollow plastic items. This is achieved by heating a mould which is placed on a rotating axis and filled with material. Once completely rotated, the material fills all parts of the mould which is then cooled until hardened to form a particular product or part.

Vacuum Forming
Vacuum Forming is used to make many different products using thermoplastic sheets. These include enclosures, packaging, helmets and baths. The sheet is heated to make it flexible enough to be formed over a mould and then cooled to become hard again.

Neoprene production involves heating, pressing and cutting sheets that contain various agents to a plastic base.

Slush Moulding
The Slush Moulding  process is used for the production of flexible and semi-rigid mouldings where a detailed surface finish is required on the outside of the moulding. This process is closely related to Dip Moulding. 


Plastic Mouldings’ products can be found in many industries: